Graphical Puzzle

[mercedes]

One of your variables at the top, should that not be Tulipa_cemeterio_ok = 1, not, -- tulipia_ok =1 ?..

If going by the rest of the script..its the only variable that doesn't fit..Also I took the liberty of adding an underscore..

If u can't close the window...its because of your variables and the space between them..

Tulipa cemeterio_ok should be-- Tulipa_cemeterio_ok --

Try renaming variables..

[Dalton]

???
I don?t get it...

One of your variables at the top, should that not be Tulipa_cemeterio_ok = 1, not, -- tulipia_ok =1 ?..

If going by the rest of the script..its the only variable that doesn't fit..Also I took the liberty of adding an underscore..

If u can't close the window...its because of your variables and the space between them..

Tulipa cemeterio_ok should be-- Tulipa_cemeterio_ok --

Try renaming variables..

[Mystery]

First problem:
You have on the 3rd line: Tulipa_ok=1
Later in the script, you use Tulipa cemeterio_ok

Second problem:
Make sure that your variables are one word.
Instead of Tulipa cemeterio_ok use Tulipa_cemeterio_ok
Do this for all variables

[mercedes]

:shock: Shocked ???
I don?t get it...

Sorry Dalton, Mystery explained what I wrote more clearly, please let us know if it makes more sense...

Peace~:D

[Dalton]

Tulipa is the name of the object in the inventory (a flower)
And the Tulipa_cemiterio is the name of the picture i?m using on the hotspot

First problem:
You have on the 3rd line: Tulipa_ok=1
Later in the script, you use Tulipa cemeterio_ok

Second problem:
Make sure that your variables are one word.
Instead of Tulipa cemeterio_ok use Tulipa_cemeterio_ok
Do this for all variables

[mercedes]

Tulipa is the name of the object in the inventory (a flower)
And the Tulipa_cemiterio is the name of the picture i?m using on the hotspot

Ok.. well..is it working for u now..? This script doesn't actually call for that, but calls for the right photos to equal 1.

So if u were following the script, it should say Tulipa_cemitero_ok =1 or both perhaps, if you are going about it differently...
Either way I hope it all works out for u..Keep us posted!~..
..


Peace

[Dalton]

Well, in part it is working. The problem is when i put the second photo in the second place, the image of the second photo is shown in the first table... and if i use the wrong photo in the wrong table, nothing happens... It should be shown the worng photo in the wrong place...

Ok.. well..is it working for u now..? This script doesn't actually call for that, but calls for the right photos to equal 1.

So if u were following the script, it should say Tulipa_cemitero_ok =1 or both perhaps, if you are going about it differently...
Either way I hope it all works out for u..Keep us posted!~..
..


Peace[/quote]

[mercedes]

Well, in part it is working. The problem is when i put the second photo in the second place, the image of the second photo is shown in the first table.

Ok if the photo is showing on the first table instead of the second table, make sure u check the hotspot number..

If u copied and pasted the code..u may have forgotten to take out hotspot-( 8 )--Replacing 8 with new number.. In the upper part of code--The second line~

And if i use the wrong photo in the wrong table, nothing happens... It should be shown the wrong photo in the wrong place

Post the code here if u can...I can only assume what it might be...Not sure..post back the code please..

Btw...
Highlight the code itself in the vbs window--- hold down CTRL and tap letter C.--keyboard

Then in reply here----

Hold down CTRL and and tap letter V..Or right click and paste~

I only mention in case u aren't sure how to do it..~:D

--Instead of a printed screen..This way I can just copy it.
With a printed screen, i can't highlight it..and copy it..

[Dalton]

Well, i?ll try one more time to use the VBS. But i?m almost thinking to use the simple interaction. The bad thing is if i?ll use the simple interaction, the puzzle will be too much easy... Actually, the puzzle is easy because there?s some tips in a poem. Well, it?s a thing to think about it

Well, in part it is working. The problem is when i put the second photo in the second place, the image of the second photo is shown in the first table.

Ok if the photo is showing on the first table instead of the second table, make sure u check the hotspot number..

If u copied and pasted the code..u may have forgotten to take out hotspot-( 8 )--Replacing 8 with new number.. In the upper part of code--The second line~

And if i use the wrong photo in the wrong table, nothing happens... It should be shown the wrong photo in the wrong place

Post the code here if u can...I can only assume what it might be...Not sure..post back the code please..

Btw...
Highlight the code itself in the vbs window--- hold down CTRL and tap letter C.--keyboard

Then in reply here----

Hold down CTRL and and tap letter V..Or right click and paste~

I only mention in case u aren't sure how to do it..~:D

--Instead of a printed screen..This way I can just copy it.
With a printed screen, i can't highlight it..and copy it..

[Dalton]

Here?s the code:

Action.RemoveItem "Tulipa"
Action.LoadAPicture Hotspot(8), "tulipa_cemiterio.jpg"
Tulipa_ok = 1

if HasItem ("Tulipa")=false and HasItem ("Rosa")=false and HasItem ("orquidea")=false and HasItem ("malva")=false and HasItem ("Girassol")=false and HasItem ("CopoDeLeite")=false Then
if tulipa_cemiterio_ok + rosa_cemiterio_ok + orquidea_cemiterio_ok + malva_cemiterio_ok + gira_cemiterio_ok + CopoDLeite_cemiterio_ok = 6 Then
Action.Message "Deu certo!"
Else
Action.Message "N?o aconteceu nada..."
Action.LoadAPicture Hotspot(8), ""
Action.LoadAPicture Hotspot(9), ""
Action.LoadAPicture Hotspot(10), ""
Action.LoadAPicture Hotspot(11), ""
Action.LoadAPicture Hotspot(12), ""
Action.LoadAPicture Hotspot(13), ""
Action.AddItem "Tulipa"
Action.AddItem "Rosa"
Action.AddItem "orquidea"
Action.AddItem "malva"
Action.AddItem "Girassol"
Action.AddItem "CopoDeLeite"
tulipa_cemiterio_ok = 0
rosa_cemiterio_ok = 0
orquidea_cemiterio_ok = 0
malva_cemiterio_ok = 0
gira_cemiterio_ok = 0
CopoDLeite_cemiterio_ok = 0
End if
End if

[Mystery]

What I see is that you're still using different variable names.

Either use
Tulipa_ok = 1
or use
tulipa_cemiterio_ok = 0

You must always use the correct name of the variable

[Dalton]

That?s the point because first line is the icon?s name and the third line is the hotspot photo (the photo on the the table)

What I see is that you're still using different variable names.

Either use
Tulipa_ok = 1
or use
tulipa_cemiterio_ok = 0

You must always use the correct name of the variable

[reneuend]

I'm removing my comment as I read your code incorrectly! sorry!

[Mystery]

"Tulipa" is the name of the item.
"tulipa_cemiterio.jpg" is the name of the photo that is loaded in the hotspot.

But you are using two different names for the same variable:
Tulipa_ok = 1
and
tulipa_cemiterio_ok = 0

You should decide if your variable is called Tulipa or tulipa_cemiterio, because otherwise the script won't work

[Dalton]

oh, now i get it. I?ll try it out

"Tulipa" is the name of the item.
"tulipa_cemiterio.jpg" is the name of the photo that is loaded in the hotspot.

But you are using two different names for the same variable:
Tulipa_ok = 1
and
tulipa_cemiterio_ok = 0

You should decide if your variable is called Tulipa or tulipa_cemiterio, because otherwise the script won't work

[Dalton]

do i have to change the names on the "if" line?

oh, now i get it. I?ll try it out

"Tulipa" is the name of the item.
"tulipa_cemiterio.jpg" is the name of the photo that is loaded in the hotspot.

But you are using two different names for the same variable:
Tulipa_ok = 1
and
tulipa_cemiterio_ok = 0

You should decide if your variable is called Tulipa or tulipa_cemiterio, because otherwise the script won't work

[reneuend]

The red colored text below should be changed to: Tulipa_ok
or...you can change the 3rd line to tulipa_cemiterio_ok = 1

whichever way you choose, there should only be one variable representing tulipa!

---------------------------------------

Action.RemoveItem "Tulipa"
Action.LoadAPicture Hotspot( 8 ), "tulipa_cemiterio.jpg"
Tulipa_ok = 1

if HasItem ("Tulipa")=false and HasItem ("Rosa")=false and HasItem ("orquidea")=false and HasItem ("malva")=false and HasItem ("Girassol")=false and HasItem ("CopoDeLeite")=false Then
if tulipa_cemiterio_ok + rosa_cemiterio_ok + orquidea_cemiterio_ok + malva_cemiterio_ok + gira_cemiterio_ok + CopoDLeite_cemiterio_ok = 6 Then
Action.Message "Deu certo!"
Else
Action.Message "N?o aconteceu nada..."
Action.LoadAPicture Hotspot(, ""
Action.LoadAPicture Hotspot(9), ""
Action.LoadAPicture Hotspot(10), ""
Action.LoadAPicture Hotspot(11), ""
Action.LoadAPicture Hotspot(12), ""
Action.LoadAPicture Hotspot(13), ""
Action.AddItem "Tulipa"
Action.AddItem "Rosa"
Action.AddItem "orquidea"
Action.AddItem "malva"
Action.AddItem "Girassol"
Action.AddItem "CopoDeLeite"
tulipa_cemiterio_ok = 0
rosa_cemiterio_ok = 0
orquidea_cemiterio_ok = 0
malva_cemiterio_ok = 0
gira_cemiterio_ok = 0
CopoDLeite_cemiterio_ok = 0
End if
End if

[Dalton]

Well guys, i did exactly what it was posted and an error message is shown. Is something about the incon?s name...

The red colored text below should be changed to: Tulipa_ok
or...you can change the 3rd line to tulipa_cemiterio_ok = 1

whichever way you choose, there should only be one variable representing tulipa!

---------------------------------------

Action.RemoveItem "Tulipa"
Action.LoadAPicture Hotspot( 8 ), "tulipa_cemiterio.jpg"
Tulipa_ok = 1

if HasItem ("Tulipa")=false and HasItem ("Rosa")=false and HasItem ("orquidea")=false and HasItem ("malva")=false and HasItem ("Girassol")=false and HasItem ("CopoDeLeite")=false Then
if tulipa_cemiterio_ok + rosa_cemiterio_ok + orquidea_cemiterio_ok + malva_cemiterio_ok + gira_cemiterio_ok + CopoDLeite_cemiterio_ok = 6 Then
Action.Message "Deu certo!"
Else
Action.Message "N?o aconteceu nada..."
Action.LoadAPicture Hotspot(, ""
Action.LoadAPicture Hotspot(9), ""
Action.LoadAPicture Hotspot(10), ""
Action.LoadAPicture Hotspot(11), ""
Action.LoadAPicture Hotspot(12), ""
Action.LoadAPicture Hotspot(13), ""
Action.AddItem "Tulipa"
Action.AddItem "Rosa"
Action.AddItem "orquidea"
Action.AddItem "malva"
Action.AddItem "Girassol"
Action.AddItem "CopoDeLeite"
tulipa_cemiterio_ok = 0
rosa_cemiterio_ok = 0
orquidea_cemiterio_ok = 0
malva_cemiterio_ok = 0
gira_cemiterio_ok = 0
CopoDLeite_cemiterio_ok = 0
End if
End if

[Mystery]

Yes, AM is picky about .ico files sometimes. We have already discussed this problem in other threads.

You might be able to open it in an image software (like GIMP or Irfanview), and save it as .ico again

[Dalton]

Already did it, using the irfanview, and still having the same problem...

Yes, AM is picky about .ico files sometimes. We have already discussed this problem in other threads.

You might be able to open it in an image software (like GIMP or Irfanview), and save it as .ico again

[Mystery]

Do you only have problems with this .ico file, or also other ones?

You can send me that .ico file by email attachment, and I'll try to make it work in AM

[Dalton]

The problem appears only in the the last "click", when i drag the photo, no metter what sequence i do, is always in the last click

Do you only have problems with this .ico file, or also other ones?

You can send me that .ico file by email attachment, and I'll try to make it work in AM

[Mystery]

Hmmm, you mean this happens also with the other .ico files?

Are all your .ico files in the Hotspot Graphic File folder?

[Dalton]

Well, there?s the ico files and the jpg...

Hmmm, you mean this happens also with the other .ico files?

Are all your .ico files in the Hotspot Graphic File folder?

[Mystery]

Okay, and is it only orquidea.ico that has problems?

[Dalton]

No, the problem is when i use the last photo in the last table. One exemple: the sequence is 3,4,1,6,5,2 and i use first the photo 2 in the table2, and the photo1 in the table1, photo 5 in the table 5... and i use the last photo in the right and last table. Then, there?s the icon problem...

Okay, and is it only orquidea.ico that has problems?

[Mystery]

Okay, now another question. I have seen that you have named your items sometimes with capital letter as first letter, others with low-case letter as first letter.

Do your items really have the names exactly like this:
Tulipa
Rosa
orquidea
malva
Girassol
CopoDeLeite

[Dalton]

Hi, sorry for answer only now, i was eating something because here in Brazil is 7: 17 pm.
Well, yes, my items have the names:
Tulipa
Rosa
orquidea
malva
Girassol
CopoDeLeite

[Mystery]

Hmmm, in that case I don't really understand why the last photo will give this error message, independently of which photo you are using

Hopefully somebody else will have an idea what might be the problem

[Dalton]

Ok, thanks. Actually thanks everybody for the tips

Hmmm, in that case I don't really understand why the last photo will give this error message, independently of which photo you are using

Hopefully somebody else will have an idea what might be the problem